InnoVida’s panels are waterproof, non-flammable, wind resistant up to 300km/h, and made of composite polyurethane (PU). The panels also creates significant noise reduction which can realize up to a U Value of 0.1 Wm/K
Panel Strength...
The InnoVida composite layers are made of high quality resin and fibreglass for a more superior and mechanical property. The InnoVida panel design allows you to construct a load-bearing wall with up to50 tons/m2 for a vertical compression load and a compression load capacity of 2 tons/m2 on the horizontal panels.
The panel corner was burned at 1250°C (2282°F) — near the melting point of steel. The fire did not spread beyond the area of direct flame,and the structural integrity was not compromised. The fire test was conducted over a period of 2 hours.
Sitting atop the InnoVida panel which is reinforced with InnoVida columns and only supported by sticks at each of the 4 corners, otherwise suspended in thin air, are 2 rolls of fiberglass 1542Kg (3,399 lbs) each, and 5 InnoVida workers totaling 500Kg (1,102 lbs) for a combined weight of 2042Kg (4501 lbs).
View datasheet for the InnoVida Panels
